Alvito Smart Basic under-sink built-in filter system

High-quality built-in filter system, dimensions without connections (incl. wall bracket) approx. WxHxD: 124x315x128 mm.

For clear, purified drinking water.

Contents: Built-in filter incl. hose set with special T-piece, shut-off valve, high-quality system couplings with backflow preventers and integrated wall bracket (without filter insert and without tap!).

Manufacturer: Alvito

The Alvito built-in filter is installed under the sink and can be connected in 3 ways.
To change the filter, only the filter inserts are exchanged, which can be used by different manufacturers.

Attention, important:

Operate all filter systems with cold water only!

Installation variant A:

with separate water tap (models Novara, Genoa, Como and Trento). The models are available here in our online shop.
The filtered water is taken from a separate tap. Clear separation of domestic water and drinking water.
Installation is also possible with a pressureless boiler!

Installation variant B:

with special 3-way tap (model Siena, Verona).
The existing tap is replaced by a special 3-way tap.
The filtered water is routed separately in the fitting. Clear separation of domestic water and drinking water.
Do not use this connection in conjunction with a pressureless boiler!

Installation variant C:

with previous tap.All cold water is filtered.
No additional tap is fitted and no tap is replaced. Operation only with filter inserts with fast water flow.